SPECIFICATIONS:

• PolyLite™ is a family of 3D printing filaments made with the best raw materials to deliver exceptional quality and reliability. PolyLite™ covers the most popular 3D printing materials to meet your everyday needs in design and prototyping.
• PolyLite™ ABS is made with a specialty bulk-polymerized ABS resin, which has significantly lower volatile content compared to traditional ABS resins. It delivers excellent printing quality with minimal odor during printing.
• Color: White
• Diameter: 2.85mm
• Sold per roll
• PRINT SETTINGS
  • Nozzle Temperature: 245˚C – 265˚C
  • Printing Speed: 30mm/s – 50mm/s
  • Bed Temperature: 90˚C – 100˚C
  • Bed Surface: BuildTak®, PEI sheet with ABS slurry
  • Cooling Fan: LOW for better surface quality / OFF for better strength
  • Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters
• MECHANICAL PROPERTIES
  • Young’s Modulus: 2174 ± 285 Mpa
  • Tensile Strength: 33.3 ± 0.8 Mpa
  • Bending Strength: 59.0 ± 1.3 Mpa
  • Charpy Impact Strength: 12.6 ± 1.1 kJ/m2
• THERMAL PROPERTIES
  • Glass Transition Temperature: 101˚C
  • Vicat Softening Temperature: 104˚C
  • Melting Temperature: N/A
• NOTES
  • Drying Settings: 80˚C for 8h
  • Recommended Support Materials: N/A

Note: Stocks and price may change without prior notice.